PLOT REPORT
-----------

Report File    : D:\CAD\User\Development\CTS-C\CTS-C (PCB - PLOT REPORT).txt
Report Written : Monday, July 22, 2013
Project Path   : D:\CAD\User\Development\CTS-C\CTS-C.prj
Design Path    : D:\CAD\User\Development\CTS-C\CTS-C.pcb
Design Title   : 
Created        : 01/05/2013 22:07:25
Last Saved     : 22/07/2013 21:55:04
Editing Time   : 857 min
Units          : mm (precision 3)

DEVICE SETTINGS
---------------

---------------
Gerber Settings
---------------

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    2.3 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.

--------------
Drill Settings
--------------

    Excellon Format 1
    Format 2.3 absolute in inches.
    No zero suppression.


PLOTS OUTPUT
------------
    Plot Job: "D:\CAD\User\Development\CTS-C\CTS-C.EPJ"


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-C\CTS-C - Top Silk.gbr"

    Layers:
    -------
    Top Silk

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 1
    D11       Round 5
    D12       Round 10


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-C\CTS-C - Top Copper.gbr"

    Layers:
    -------
    Top Copper

    D-Code    Shape  (thou)
    -----------------------
    D13       Round 236
    D14       Round 60
    D15       Rectangle 60 X 80
    D16       Square 60
    D17       Round 70
    D18       Oval 63 X 126
    D19       Oval 59 X 126
    D70       Round 118
    D71       Round 15
    D20       Round 55
    D21       Round 50


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-C\CTS-C - Top Copper (Resist).gbr"

    Layers:
    -------
    Top Copper

    D-Code    Shape  (thou)
    -----------------------
    D22       Round 246
    D23       Round 70
    D24       Rectangle 70 X 90
    D25       Square 70
    D26       Round 80
    D27       Oval 73 X 136
    D28       Oval 69 X 136
    D29       Round 128


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-C\CTS-C - Bottom Copper.gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D11       Round 5
    D12       Round 10
    D13       Round 236
    D14       Round 60
    D15       Rectangle 60 X 80
    D16       Square 60
    D17       Round 70
    D18       Oval 63 X 126
    D19       Oval 59 X 126
    D70       Round 118
    D71       Round 15
    D20       Round 55
    D21       Round 50


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-C\CTS-C - Bottom Copper (Resist).gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D22       Round 246
    D23       Round 70
    D24       Rectangle 70 X 90
    D25       Square 70
    D26       Round 80
    D27       Oval 73 X 136
    D28       Oval 69 X 136
    D29       Round 128


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-C\CTS-C - Bottom Silk.gbr"

    Layers:
    -------
    Bottom Silk
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D11       Round 5


NC Drill Output
---------------

    Output:
    -------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    "D:\CAD\User\Development\CTS-C\CTS-C - Drill Data - Through Hole.drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.031 in            5   E
    T002        00.035 in           98   G
    T003        00.051 in            4   O
    T004        00.157 in            4   Q
    --------------------------------------
    All                            111
    --------------------------------------

NC Drill Output
---------------

    Output:
    -------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    "D:\CAD\User\Development\CTS-C\CTS-C - Drill Data - Through Hole (Unplated).drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.025 in            1   
    --------------------------------------
    All                              1
    --------------------------------------

Gerber Output
-------------

    "D:\CAD\User\Development\CTS-C\CTS-C - Drill Ident Drawing - Through Hole.gbr"

    Layers:
    -------

    Drill Ident Drawing
    -------------------

    Drill     Plated    Size      Shape     ID        
    --------------------------------------------------
    31        Y         100       Round     E         
    35        Y         100       Round     G         
    51        Y         100       Round     O         
    157       Y         100       Round     Q         
    --------------------------------------------------

    D-Code    Shape  (thou)
    -----------------------
    D11       Round 5
    D72       Round 100


End Of Report.
